The range of application of the high-temperature furnace

High-temperature furnace is the national standard energy-saving cycle operating furnace, mainly for steel products, a variety of metal parts normalizing, hardening, annealing heat treatment purposes, or diamond cutting blade for high-temperature sintering purposes.
High-temperature furnace Precautions
In addition to doing the experiment, do not stay in the area of ??high-temperature furnace tube.
Experimental work is completed, if not continue to use special gas, close reserved N2 flow tube maintained at the standby temperature and see if there are other power the customs not related, such as: cleanhood light, boiling acid with a small electric furnace or other, please turn off.
Dealing with HF, gloves, such as accidentally ran into HF, immediately flush with calcium gluconate plus 2% water, rub the wound 15 '.
Quartz glass products be used with care, so as not to rupture, causing severe cuts.
Avoid inhalation of smoke from the stove or treatment tank of gas.
Potassium cyanide (KCN) can not be set, because the two can produce highly toxic KCN gas mixed with acids.
Once found to interfere with the security of things, please immediately notify the relevant personnel (technicians).
Please save the amount of pure water.
Broken wafer, filter paper, cotton swabs ....... Do not fall into the drainage holes at the bottom of the cleaning tank, so as not to cause the floor to waterlogging due to poor drainage.
Length of putting the front end, not to facing up to avoid contamination.
Wafer into the baked mouth, to undertake the holder of the boat, do not touch the tube mouth, to avoid contamination of the furnace tube.